How to clean the scale on the pump tank

The pump water tank is an important part in the operation of the excavator. Because of its long-term need to hold water, and in the operation of the excavator, the pump water tank is always in a state of constant heat dissipation. Therefore, there is a large amount of scale in the pump tank, and the pump truck The entrance of the water tank is small. At this time, it is necessary to clean the pump water tank. Otherwise, it is not cleaned. How to clean the scale on the pump tank?

First, drain the radiator and the coolant inside the engine body, then close the drain plug and add tap water and detergent to the radiator.

Secondly, start the excavator engine and run at a speed slightly higher than the low speed idling. When the pointer of the thermometer reaches the green area, continue to run the engine for about ten minutes.

After that, turn off the engine and open the drain plug, and rinse the cooling system with tap water until the clean water is drained.

The above is the cleaning method for scale on the pump tank. If you need to know more about the use of the pump tank, please continue to pay attention to us!